The initial settings of the following e-mail parameters are all "0" (all parameters disabled).

Switch 00

No

FUNCTION

COMMENTS

0

MH Compression mode for e-mail attachments

0: Off

1: On

Switches MH compression on and off for files attached to e-mails for sending.

1

MR Compression mode for e-mail attachments

0: Off

1: On

Switches MR compression on and off for files attached to e-mails for sending.

2

MMR Compression mode for e-mail attachments

0: Off

1: On

Switches MMR compression on and off for files attached to e-mails for sending.

3-6

Not used

Do not change these settings.

7

Designates the bits to reference for compression method of e-mail attachments

0: Registered (Bit 0 to 6)

1: No registration.

The "0" selection (default) references the settings for Bits 00, 01, 02 above. The "1" selection ignores the selections of Bits 00, 01, 02.

Switch 01

No

FUNCTION

COMMENTS

0

Original width of e-mail attachment: A4

0: Off

1: On

Sets the original width of the e-mail attachment as A4.

1-6

Not used

Do not change these settings.

7

Designates the bits to reference for original size of e-mail attachments

0: Registered (Bit 0 to 6)

1: No registration.

The "0" selection (default) references the settings for Bits 00, 01, 02 above. The "1" selection ignores the selections of Bits 00, 01, 02.

Switch 02

No

FUNCTION

COMMENTS

0

Line resolution of e-mail attachment: 200 x 100

0: Off

1: On

Sets the line resolution of the e-mail attachment as 200 x100.

1

Line resolution of e-mail attachment: 200 x 200

0: Off

1: On

Sets the line resolution of the e-mail attachment as 200 x 200.

2-6

Not used

Do not change these settings.

7

Designates the bits to reference for original size of e-mail attachments

0: Registered (Bit 0 to 6)

1: No registration.

The "0" selection (default) references the settings for Bits 00, 01, 02, 04 above. The "1" selection ignores the selections of Bits 00, 01, 02, 04.

Switch 03 - Not used (Do not change the settings.)

Switch 04

No

FUNCTION

COMMENTS

0

Full mode address selection

0: Full mode address

1: No full mode (simple mode)

If the other ends have the addresses, which have the full mode function flag ("0"), this machine determines them as full mode standard machines.

  • This machine attaches the "demand of reception confirmation" to a message when transmitting.
  • This machine updates the reception capability to the address book when receiving.

Switch 05

No

FUNCTION

COMMENTS

0

Direct transmission selection to SMTP server

0: ON

1: OFF

Allows or does not allow the direct transmission to SMTP server.