This LCIT unit has a new roller contact mechanism (pair of four rollers contacts/separates) to release rollers that grip the trailing edge of paper when the SWIFT unit corrects the position of the paper in the main machine (Pro C9200/C9210 models only).
The long paper contact motors 1 to 4 ([A] - [D]) are for vertical transport (for three paths [1] [2] [3]). The three paths are related to Multi Bypass Attachment Kit for Vacuum Feed LCIT Type S9 [1], Multi Bypass Banner Sheet Tray Type S9 [2], Bridge A3 LCIT [3] respectively.
Additionally, the Tray 1 vertical transport sensor [E] and vertical transport entrance sensor [F] are newly added to detect the transport of long paper.
When attached to Pro C7200/C7210 series models, this roller contact mechanism for long paper does not function.
The contact operation of the rollers is the same way of the LCIT exit roller contact mechanism that is previously employed.
As an example, the contact mechanism of the LCIT exit rollers is explained as follows.
When the LCIT exit roller contact motor [A] is ON, it turns the cam [C] on the driveshaft via the belt [B]. The roller contact arm [D] moves up/down in conjunction with the cam, and this mechanism separates the slave exit roller [E] from the drive exit roller [F]. The LCIT exit roller contact sensor [G] detects whether or not they are in contact.