1. Remove the bracket [A]. (x1)
  2. Remove the side fence shafts [A] and [B] on the rear side (x2). Pull out the shaft in the direction of the arrow. The [B] shaft has a spring.
  3. Insert a screwdriver in the opening in the frame and remove the ground connection (x1).
  4. Remove the screws in the side fence (x4).
  5. Release the clamp (x2).
  6. Hold down the lock lever [A] and raise the side fence [B].
  7. Remove the connectors from the bottom of the side fence (x4,x2).

  8. Lift the side fence (rear) and remove it.

    Install the spring on the end face shaft as shown in the photo.