- Remove the tray front cover. (Tray Front Cover (Tray 1, 2))
- Remove the paper tray. (Paper Tray)
- Remove the plate [A] from the end fence side. (
x4).
- Turn the wire pick-up roller [A] at the rear of the paper tray in a clockwise direction to raise the bottom plate until it becomes visible on the end fence side.
- When the bottom plate has been raised, insert a screwdriver or similar object in the hole in the sheet metal at the bottom of the wire pick-up roller to prevent the pin [A] from turning.
- Remove the bottom plate [A] on the front side.
Remove the side fence guide [A].
The guide is secured by the hook parts [A] that fit on the bottom plate.
- As the same way in the previous steps, remove the bottom plate on the rear side to remove the side fence guide.
- Remove the plate [A] on the feed side.
- Fully close the side fences.