1. Remove the upper inner cover (Upper Inner Cover)
  2. Remove the lower inner cover (Lower Inner Cover)
  3. Remove the rear right and left covers (Rear Right Cover, Rear Left Cover).
  4. Remove each vertical transport unit cooling fan bracket. (Vertical Transport Unit Cooling Fan)
  5. Remove the vertical transport exit motor bracket (Vertical Transport Exit Motor)
  6. Remove the tray 2 vertical transport motor 2 bracket (Tray 2 Vertical Transport Motor 2)
  7. Disconnect all the harnesses that are connected to the vertical feed unit (x all,x all).

  8. Remove the stay [A] from the left side (x4).
  9. Remove the six screws that secure the vertical feed unit [B] to the vacuum feed LCIT (x6).
  10. If linked to the vacuum feed LCIT, remove the horizontal feed unit (x4).
  11. If linked to the vacuum feed LCIT, remove the paper jam processing lever [A] (x2).
  12. Use both hands to support the vertical feed unit, raise it slightly and pull it towards you.
  13. Place the vertical feed unit on the PSU box [A] and pull it out gently.