1001 | [Scan Nv Version] | ||
1-001-005 | - | *CTL | - |
Operates automatic initialization to ensure that scanner NV is initialized if necessary. To do this SP, specify the version of scanner NV within 9 characters. “Function name”_”Machine code”_”Serial number” - Function name: Enter “3”. - Machine code: Enter the machine code with three characters. - Serial number: Enter the number (default: 001). | |||
1005 | [Erase margin(Remote scan)] | ||
1-005-001 | Range from 0 to 5 mm | *CTL | [0 to 5 / 0 / 1 mm/step] |
Creates an erase margin for all edges of the scanned image. If the machine has scanned the edge of the original, create a margin. This SP is activated only when the machine uses TWAIN scanning. | |||
1009 | [Remote scan disable] | ||
1-009-001 | 0:enable 1:desable | *CTL | [0 or 1 / 0 / - /step] |
Enable or disable remote scan. | |||
1010 | [Non Display ClearLight PDF] | ||
1-010-001 | 0:Display 1:Nondisplay | *CTL | [0 or 1 / 0 / - /step] |
Display or nondislay ClearLight PDF function. | |||
1011 | [Org Count Disp] | ||
1-011-001 | 0:ON 1:OFF | *CTL | [0 or 1 / 0 / - /step] |
Display or nondislay original counter. 0: Displays remaining memory. 1: Displays original counter. | |||
1012 | [UserInfo Release] | ||
1-012-001 | 0:No 1:Yes | *CTL | [0 or 1 / 1 / - /step] |
Set if the following user information is released or not. - Destination of the mail, folder, CS - Sender - Message - Subject - Fail name | |||
1013 | [Scan to Media Device Setting] | ||
1-013-002 | 0:OFF 1:ON | *CTL | [0 or 1 / 1 / - /step] |
Enable or disable ScanTo media device. | |||
1014 | [Scan to Folder Pass Input Set] | ||
1-014-001 | 0:OFF 1:ON | *CTL | [ 0 or 1 / 0 / - /step] |
Sets enable or disable the password setting when make a Scan to Folder job. | |||
1016 | [Scan To Email Sender Address] | ||
1-016-001 | 0:Login User Address 1:POP before SMTP Address | ||
Sets the sender of Scan to e-mail function. | |||
1041 | [Scan:FlairAPI Setting] | ||||
1-041-001 | 0x00 – 0xff | *CTL | * see BitSwitch below: | ||
Sets Scanner FlairAPI Function enable / disable. This SP is set by BitSwitch and needs to reboot the machine after making changes. | |||||
bit | Setting | meanings | Description | ||
0 | 1 | ||||
bit 0 | Start of FlairAPI Server | Off (Do not Start) | On (Start) | Sets whether to start exclusive FlairAPI http server. If it is 0, scanning FlairAPI function and simple UI function will be disabled. | |
bit 1 | Access permission of FlairAPI from outside of the machine | Disabled | Enabled | If it is “0”, accessing is limited from the machine only, such as operating panel, SDK/J, MFP browsers etc… If it is “1”, accessing is allowed from outside of FlairAPI such as PC, Remote UI, IT-Box etc… | |
bit 2 | IPv6 (Exclusive) / IPv4 (Priority) Switching | IPv6 (Exclusive) | IPv4 (Priority) | If this bit is “0”, only IPv6 accessing is permitted. If this bit is “1” and IPv4 is enabled, the machine uses IPv4 accessing. If this bit is “1” and IPv4 is disabled, the machine uses IPv6 accessing. In this case, it is unable to access through Smart Operation Panel if IPv4 address is enabled. | |
bit 3 | Remote UI Function | Not Used | Use | Sets use of Remote UI for scanner function. | |
bit 4 | Reserved | - | - | - | |
bit 5 | Reserved | - | - | - | |
bit 6 | Reserved | - | - | - | |
bit 7 | Reserved | - | - | - | |