To enable the machine for the maintenance by the service technician, the meter-click charge mode must be set to "1 (On)" with SP5930-001.
Also, make the following settings for meter-click charge mode depending on the type of service contract: SP5930-010, 014, 016 (Supply End Option.), SP1007-002, 004, 006 (PDCU, Image Transfer Belt, Fusing Unit: Remaining Supply Display), SP5083 (LED Light Switch)
PM items serviced by the service technician are designated as user replaceable items and yield items.
The following table shows the expected yield values for PM items when replacing them by the service technician with the meter-charge mode on.
Item | Yield |
|---|---|
PCDU | BK: Approx. 23K prints/unit CMY: Approx. 18K prints/unit |
Fusing Unit | 180K prints/unit |
Image Transfer Belt Unit | 115K prints/unit |
Paper Transfer Roller Unit | 115K prints/unit |
Air Filter | 115K prints |
Waste Toner Bottle | 13K prints |
The replacement timing for customer maintenance is set earlier than the target yield for service maintenance in order to ensure that the parts of the machine are replaced before an image problem occurs.