After changing an SP value for registration or image adjustment, print a test pattern to check the adjustment result.

  • Some of these test patterns are used for print image adjustments but most are used primarily for design testing.
  • Do not operate the machine until the test pattern is printed out completely. Otherwise, an SC occurs.

  1. Enter the SP mode.
  2. Select SP5-903-005.
  3. Enter the number for the test pattern that you want to print and press [OK].
  4. Enter the SP5-903-001 to 008 and modify the test print parameters below if needed:
    SP5-903-001: Feed Tray
    SP5-903-002: Duplex Setting
    SP5-903-003: Paper Size
    SP5-903-004: Color Mode
    SP5-903-006: Paper Kind
    SP5-903-007: Print Page
    SP5-903-008: Freerun Setting
  5. Enter SP-5-903-009 and touch “Execute” to print test pattern.
  6. After checking the test pattern, reset SP5-903-005 to “0: None”
  7. Exit the SP mode.

No

Pattern

No

Pattern

0

None

8

S Grid

1

V1 Line

9

20mm Grid

2

H1 Line

10

1 by 1

3

V2 Line

11

2 by 2

4

H2 Line

12

4 by 4

5

V Grid

13

Full dot

6

H Grid

14

Belt

7

20mm Grid

-

-