SP1-XXX

1001

[Bit Switch]

1-001-001

Bit Switch 1

0

1

bit 0

DFU

-

-

bit 1

Responding with the hostname as the sysName

Model

name

(PnP name)

Hostname

This BitSwitch can change the value of the sysName.

0 (default): Model name (PnP name) such as "MP C401SP"

1: Host name

bit 2

DFU

-

-

bit 3

No I/O Timeout

Disabled

Enabled

Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting will have no affect. I/O Timeouts will never occur.

bit 4

SD Card Save Mode

Disabled

Enabled

If this bit switch is enabled, print jobs will be saved to the GW SD slot and not output to paper.

bit 5

[PS and PDF] Paper size error margin

±5pt

±10pt

When a PS job is printed by using a custom paper size, the job might not be printed because of a paper size mismatch caused by a calculation error. By default, the error margin for matching to a paper size is ±5 points. By enabling this BitSwitch, the error margin for matching to a paper size can be extended to ±10 points.

bit 6

Color balance switching

0:Disabled

1:Enabled

This BitSwitch can be used to restore the color balance to match that of previous models. If this BitSwitch is set to "1" (Enabled), the color balance that is equivalent to Fuji-Xerox printers will be used.

bit 7

Not used

-

-

1001

[Bit Switch]

1-001-002

Bit Switch 2

0

1

bit 0

Color balance switching

Disabled

Enabled

This BitSwitch can be used to restore the color balance to match that of previous models. If this BitSwitch is set to "1" (Enabled), the color balance from 09S and earlier models will be used.

bit 1

Not used

-

-

bit 2

Applying a Collate Type

Shift Collate

Normal Collate

A collate type (shift or normal) will be applied to all jobs that do not explicitly define a collate type.

Note: If #5-0 is enabled, this BitSwitch has no effect.

bit 3

[PCL5e/c,PS]: PDL Auto Switching

Enabled

Disabled

Enables/Disables the machine's ability to change the PDL processor mid-job.

Some host systems submit jobs that contain both PS and PCL5e/c. If Auto PDL switching is disabled, these jobs will not be printed properly.

bit 4

Color balance switching

Disabled

Enabled

This BitSwitch can be used to restore the color balance to match that of previous models. If this BitSwitch is set to "1" (Enabled), the color balance from 09A and Extended 09A models will be used.

bit 5

Not used

-

-

bit 6

Switch dither

Use normal

dither

Use alternative dither

*Please refer to RTB#RD014018

bit 7

DFU

-

-

1001

[Bit Switch]

1-001-003

Bit Switch 3

0

1

bit 0

Not used

-

-

bit 1

Not used

-

-

bit 2

[PCL5e/c]: Legacy HP compatibility

Disabled

Enabled

Uses the same left margin as older HP models such as HP4000/HP8000.

In other words, the left margin defined in the job (usually "<ESC>*r0A") will be changed to "<ESC>*r1A".

bit 3

Not used

-

-

bit 4

Not used

-

-

bit 5

Not used

-

-

bit 6

Not used

-

-

bit 7

-

-

1001

[Bit Switch]

1-001-004

Bit Switch 4

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

DFU

-

-

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

DFU

-

-

bit 7

DFU

-

-

1001

[Bit Switch]

1-001-005

Bit Switch 5

0

1

bit 0

Show "Collate Type", "Staple Type" and "Punch Type" buttons on the operation panel.

Disabled

Enabled

If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type from the operation panel. The available Types will depend on the device and configured options.

After enabling this BitSw, the settings will appear under:

"User Tools > Machine Features > Printer Features > System"

bit 1

Multiple copies if a paper size or type mismatch occurs

Disabled

(single copy)

Enabled

(multiple)

If a paper size or type mismatch occurs during the printing of multiple copies, only a single copy is output by default. Using this BitSw, the device can be configured to print all copies even if a paper mismatch occurs.

bit 2

Prevent SDK applications from altering the contents of a job.

Disabled

Enabled

If this BitSw is enabled, SDK applications will not be able to alter print data. This is achieved by preventing SDK applications from accessing a module called the "GPS Filter".

Note: The main purpose of this BitSw is for troubleshooting the effects of SDK applications on data.

bit 3

[PS] PS Criteria

Pattern3

Pattern1

Change the number of PS criterion used by the PS interpreter to determine whether a job is PS data or not.

For details, refer to “Printing Features”.

bit 4

Increase max. number of stored jobs.

Disabled (100)

Enabled (750)

Changes the maximum number of jobs that can be stored on the HDD. The default (disabled) is 100. If this is enabled, the max. will be raised to 750 or 1000 depending on the model.

bit 5

Face-up output

Disabled

Enabled (Face-up)

bit 6

Method for determining the image rotation for the edge to bind on.

Disabled

Enabled

If enabled, the image rotation will be performed as they were in the specifications of older models for the binding of pages of mixed orientation jobs.

The old models are below:

- PCL: Pre-04A models

- PS/PDF/RPCS:Pre-05S models

bit 7

Not used

-

1001

[Bit Switch]

1-001-006

Bit Switch 6

0

1

bit 0

Not used

-

-

bit 1

Not used

-

-

bit 2

Not used

-

-

bit 3

Not used

-

-

bit 4

Not used

-

-

bit 5

Not used

-

-

bit 6

Not used

-

-

bit 7

Not used

-

-

1001

[Bit Switch]

1-001-007

Bit Switch 7

0

1

bit 0

Not used

-

-

bit 1

Not used

-

-

bit 2

Not used

-

-

bit 3

Not used

-

-

bit 4

Not used

-

-

bit 5

Not used

-

-

bit 6

Not used

-

-

bit 7

Not used

-

-

1001

[Bit Switch]

1-001-008

Bit Switch 8

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

[PCL,PS]: Allow BW jobs to print without requiring User Code

Disabled

Enabled (allow BW jobs to print without a user code)

BW jobs submitted without a user code will be printed even if usercode authentication is enabled.

Note: Color jobs will not be printed without a valid user code.

bit 4

Not used

-

-

bit 5

Not used

-

-

bit 6

PCL, RPCS, PS: Forced BW print

Enabled

Disabled

Switches whether to ignore PDL color command.

bit 7

[PDF]: Orientation Auto Detect Function

Enabled

Disabled

Automatically chooses page orientations of PDF jobs (Landscape or Portrait) based on the content.

1001

[Bit Switch]

1-001-009

Bit Switch 9

0

1

bit 0

PDL Auto Detection timeout of jobs submitted via USB or Parallel Port (IEEE 1284).

Disabled

(Immediately)

Enabled

(10 seconds)

To be used if PDL auto-detection fails. A failure of PDL auto detection doesn't necessarily mean that the job can't be printed. This bit switch tells the device whether to time-out immediately (default) upon failure or to wait 10 seconds.

bit 1

Not used

-

-

bit 2

Job Cancel

Disabled

(Not cancelled)

Enabled

(Cancelled)

If this bit switch, all jobs will be cancelled after a jam occurs.

Note: If this bitsw is enabled, printing under the following conditions might result in problems:

- Job submission via USB or Parallel Port

- Spool printing (WIM >Configuration > Device Settings > System)

bit 3

PCL/PS bypass tray paper rotation (SEF/LEF)

Disabled

Enabled

This bitsw causes the device to revert to the behavior of previous generations. It only takes effect if "Bypass Tray Setting Priority" = "Driver/Command".

Previous spec (bitsw=1): If a standard sized paper mismatch occurred in the bypass tray, the MFP/LP always prompted for SEF paper.

If this bitsw=0 (default) then in the event of a standard sized paper mismatch, the MFP/LP will always prompt for paper of the rotation (SEF/LEF) determined by the MFP/LP bypass tray paper setting or by the bypass tray sensor.

bit 4

Timing of the PJL Status ReadBack (JOB END) when printing multiple collated copies.

Disable

Enable

This bitsw determines the timing of the PJL USTATUS JOB END sent when multiple collated copies are being printed.

0 (default): JOB END is sent by the device to the client after the first copy has completed printing. This causes the page counter to be incremented after the first copy and then again at the end of the job.

1: JOB END is sent by the device to the client after the last copy has finished printing. This causes the page counter to be incremented at the end of each job.

bit 5

Display UTF-8 text in the operation panel

Enabled

Disabled

Enabled (=0):

Text composed of UTF-8 characters can be displayed in the operation panel.

Disabled (=1):

UTF-8 characters cannot be displayed in the operation panel.

For example, job names are sometimes stored in the MIB using UTF-8 encoded characters. When these are displayed on the operation panel, they will be garbled unless this BitSw is enabled (=0).

bit 6

Disable super option

Enabled

Disabled

Switches super option disable on / off. It this is On, multiple jobs are grouped at LPR port. PJL settings are enabled even jobs that are specified queue names are sent.

bit 7

Enable/Disable Print from USB/SD's Preview function

Enabled

Disabled

Determines whether Print from USB/SD will have the Preview function.

Enabled (=0): Print from USB/SD will have the Preview function.

Disabled (=1): Print from USB/SD will not have the Preview function.

1001

[Bit Switch]

1-001-010

Bit Switch A

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

DFU

-

-

bit 4

Not used

-

-

bit 5

Store and Skip Errored Job locks the queue

Queue is not locked after SSEJ

Queue locked after SSEJ

If this is 1, then after a job is stored using Store and Skip Errored Job (SSEJ), new jobs cannot be added to the queue until the stored job has been completely printed.

bit 6

Allow use of Store and Skip Errored Job if connected to an external charge device.

Does not allow SSEJ with ECD

Allows SSEJ with ECD

If this is 0, Store and Skip Errored Job (SSEJ) will be automatically disabled if an external charge device is connected.

Note: We do not officially support enabling this bitsw (1). Use it at your own risk.

bit 7

Job cancels remaining pages when the paid-for pages have been printed on an external charge device

Job does not cancel

Job cancels

When setting 1 is enabled, after printing the paid-for pages on an external charge device, the job that includes any remaining pages will be canceled.

This setting will prevent the next user from printing the unnecessary pages from the previous user's print job.

1001

[Bit Switch]

1-001-011

Bit Switch B

0

1

bit 0

Show Menu List

Hide Menu List

Show Menu List

If this is 0, the Menu List button will be removed from Printer Features.

bit 1

Print job interruption

Does not allow interruption

Allow interruption

0 (default): Print jobs are not interrupted. If a job is promoted to the top of the print queue, it will wait for the currently printing job to finish.

1: If a job is promoted to the top of the queue, it will interrupt the currently printing job and start printing immediately.

bit 2

Not used

-

-

bit 3

Change the behavior of the center staple

Cancel the job

Continue to print

This Bit Switch can change the behavior of the center staple when the maximum number of sheets for stapling is exceeded.

0 (default): The job is canceled and an error is recorded in the log.

1: The job is not canceled and is produced. How the job is produced in any behavior depends on the type of finisher.

bit 4

Add "Apply Auto Paper Select" is the condition that decides if the device's paper size or paper type should be overwritten.

Disabled

Enabled

- Apply Auto Paper Select = OFF: Overwritten (priority is given to the job’s commands)

- Apply Auto Paper Select = ON: Not overwritten (priority is given to the device settings)

bit 5

Not used

-

-

bit 6

Not used

-

-

bit 7

Not used

-

-

1001

[Bit Switch]

1-001-012

Bit Switch C

0

1

bit 0

DFU

-

-

bit 1

Not used

-

-

bit 2

Not used

-

-

bit 3

Not used

-

-

bit 4

Not used

-

-

bit 5

Change the user ID type displayed on the operation panel

Login User Name

User ID

As of 15S models, the Login User Name can be displayed on the operation panel. The user ID type displayed on the operation panel can be changed by configuring BitSwitch #12-5 as follows:

- 0 (default): Login User Name

- 1: User ID. If this is enabled, User ID will be displayed, which is equivalent to the behavior exhibited in 14A and earlier models.

bit 6

Ability to use AirPrint

Enabled

Disabled

For 15S and later models that support AirPrint, AirPrint can be disabled by changing this Bit Switch from 0 (default) to 1.

bit 7

Not used

-

-

1003

[Clear Setting]

1-003-001

Initialize System

*CTL

[- / - / -]

[Execute]

Initializes settings in the "System" menu of the user mode.

1-003-003

Delete Program

*CTL

[- / - / -]

[Execute]

1004

[Print Summary]

Prints the service summary sheet (a summary of all the controller settings).

1-004-001

Print Summary

*CTL

[- / - / -]

[Execute]

1-004-002

Print Summary2

*CTL

[- / - / -]

[Execute]

1005

[Display Version]

1-005-002

Printer Version

*CTL

[ - / - / - ]

Displays the version of the controller firmware.

1101

[Data Recall]

Recalls a set of gamma settings. This can be either a) the factory setting, b) the previous setting, or c) the current setting.

1-101-001

Factory

*CTL

[ - / - / - ]

[Execute]

1-101-002

Previous

*CTL

1-101-003

Current

*CTL

1-101-004

ACC

*CTL

1102

[Resolution Setting]

Selects the printing mode (resolution) for the printer gamma adjustment.

1-102-001

Tone Control Mode Selection

CTL

[0 to 9 / 0 / 1/step]

0: 1200x1200 Photo (2bit/4col)

1: 1200x1200 Photo (1bit/4col)

2: 600x600 Photo (4bit/4col)

3: 600x600 Photo (2bit/4col)

4: 600x600 Photo (1bit/4col)

5: 1200x1200 Text (2bit/4col)

6: 1200x1200 Text (1bit/4col)

7: 600x600 Text (4bit/4col)

8: 600x600 Text (2bit/4col)

9: 600x600 Text (1bit/4col)

1103

[Test Page]

Prints the test page to check the color balance before and after the gamma adjustment.

1-103-001

Color Gray Scale

CTL

[ - / - / - ]

[Execute]

1-103-002

Color Pattern

CTL

1104

[Gamma Adjustment]

Adjusts the printer gamma for the mode selected in the "Mode Selection" menu.

1-104-001

Black: Highlight

CTL

[0 to 255 / 00 / 1/step ]

1-104-002

Black: Shadow

CTL

1-104-003

Black: Middle

CTL

1-104-004

Black: IDmax

CTL

1-104-021

Cyan: Highlight

CTL

1-104-022

Cyan: Shadow

CTL

1-104-023

Cyan: Middle

CTL

1-104-024

Cyan: IDmax

CTL

1-104-041

Magenta: Highlight

CTL

1-104-042

Magenta: Shadow

CTL

1-104-043

Magenta: Middle

CTL

1-104-044

Magenta: IDmax

CTL

1-104-061

Yellow: Highlight

CTL

1-104-062

Yellow: Shadow

CTL

1-104-063

Yellow: Middle

CTL

1-104-064

Yellow: IDmax

CTL

1105

[Save Tone Control Value]

Stores the print gamma adjusted with the "Gamma Adj." menu item as the current setting. Before the machine stores the new "current setting", it moves the data currently stored as the "current setting" to the "previous setting" memory storage location.

1-105-001

Save Tone Control Value

*CTL

[ - / - / - ]

[Execute]

1106

[Toner Limit]

Adjusts the maximum toner amount for image development.

1-106-001

Toner Limit Value

*CTL

[0 to 400 / 0 / 1 %/step ]

1110

[Media Print Device Setting]

Selects the setting for the media print device.

1-110-002

0: Disable 1: Enable

*CTL

[0 or 1 / 1 / 1 / step]

1111

[All Job Delete Mode]

1-111-001

-

*CTL

[ 0 or 1 / 0 / 1 / step ]

0: Excluding New Job

1: Including New Job

Selects whether to include an image processing job in jobs subject to full cancellation from the SCS job list.