1. Remove the DF unit from the machine. (Document Feeder)
  2. Remove the rear cover. (Rear Cover - MF Model)
  3. Remove the controller box cover [A].
  4. Grip both ends of the rear top cover [A], and lift it off its hinges.
  5. Open the rear top cover [A], and then remove it by lifting it up.

  6. Remove the screw holding the FFC on the scanner, and then release the harness.

  7. Release the entire harness on the main unit.

  8. Remove the two screws on the right of the scanner unit [A].

  9. Remove the screw on the left of the scanner unit.

  10. Slide the scanner unit [A] to the right and then remove it.

 

  • When attaching the scanner unit, first attach the screws [A] removed in Step 8, then attach the screw [B] removed in Step 9.