1. Remove the DF rear cover. (DF Rear Cover)
  2. Remove all the harnesses routed along the left harness guide [A]
     
  3. Remove the FFC [A] from the left harness guide
  4. Remove the left harness guide [A]
  5. Remove the DF relay board [A] and then remove all the harnesses and the FFC routed along the right harness guide [B].
  6. Remove the right harness guide [A]
  7. Remove the DF top cover set sensor [A].
  8. Remove the DF drive motor with bracket [A]

  9. Remove the bearing [A], then remove the DF drive motor [B].
  10. When replacing the new motor, apply grease (Molykote) as shown in the photo below.