New unit components

The new DF unit has a harness connected to it, to connect the DF unit to the machine. Remove this harness, and connect the DF unit to the machine using the harness in the red frame that is already connected to the machine.

 

Platen sheet adjustment
  1. Open the DF.
  2. Place the platen sheet [A] on the exposure glass
  3. Align the platen sheet with the hook-and-loop fasteners [C], with the rear left corner [B] on the exposure glass corner as a reference.

  4. Close the DF gently.
  5. Reopen the DF
  6. Press the surface of the platen sheet gently to attach it firmly to the DF.