1. Put both stabilizer legs on. (Stabilizing the De-curl Unit)

  2. Pull the de-curl roller unit out. (De-curl Roller Unit)

  3. Remove the rear upper cover. (Rear Covers)

    • The paper path junction gate solenoid [A] is at the rear, below the transport motor

  4. Remove the transport motor unit. (Transport Motor)

  5. Disconnect the harness [A] of the solenoid ( x1).

  6. Remove plunger collar [A] ( x1).

  7. Disconnect the solenoid from the bracket [A] ( x2).

  8. Pull the solenoid [A] out from the top.

  9. Unhook the plunger spring [A] from the junction gate [B] and remove the plunger.