1. Remove the joint bracket [A] from the left side of the de-curl Unit ( x4).

    • The corners and edges of the joint bracket are sharp.
    • Remove the joint bracket to prevent injury while working around the De-curl Unit.
    • We recommend that you ask someone to hold the top of the de-curl unit while you attach the stabilizer legs. (This procedure requires about 10 minutes.)

  2. On the left side, remove:

    [A] Stabilizer leg ( x2, Knob screws)

    [B] Stabilizer leg ( x2, Knob screws)

  3. Set the stabilizer legs and the knob screws aside.

  4. Open the front door of the De-curl Unit.

  5. Remove the lock bar screw [A] ( x1)

  6. Pull out the lock bar until it stops.

  7. Pull the De-curl Unit away from the main machine until you can see the ends of the joint bracket [A], then stop.

  8. Push in the lock bar, and re-attach the screw that you removed in Step 5 so that you will not lose it.