1. Put both stabilizer legs on. (Stabilizing the De-curl Unit)

  2. Pull the de-curl roller unit out. (De-curl Roller Unit)

  3. Remove the rear upper cover. (Rear Covers)

      • The transport motor [A] is under the rear top edge of the unit.

  4. Remove the cover brace [A] ( x2).

  5. Disconnect the motor harness [B]. ( x1, x1)

  6. Remove two screws [A]. ( x2)

  7. From the rear, raise the motor unit, slide it up then to the right to disengage the hook [A] (as shown below), then remove the motor unit from the other side.

  8. Remove the motor from its bracket. ( x2).