• The de-curler roller HP sensor [A] is located on the right side at the rear.

  1. Put both stabilizer legs on. (Stabilizing the De-curl Unit)

  2. Pull the de-curl roller unit out. (De-curl Roller Unit)

  3. Remove the rear upper cover. (Rear Covers)

  4. Remove the transport motor unit. (Transport Motor)

  5. Free the harness [A] ( x1)

  6. Remove the screw where the transport motor was removed.

  7. Pull out the HP sensor bracket [A].

  8. Remove the HP sensor [B]. ( x1)