1. Put both stabilizer legs on. (Stabilizing the De-curl Unit)

  2. Pull the de-curl roller unit out. (De-curl Roller Unit)

  3. Remove the rear upper cover. (Rear Covers)

      • The exit guide solenoid [A] and plunger [B] are at the left rear corner.

  4. Remove the transport motor unit. (Transport Motor)

  5. Press up the bottom of the plunger [A] to drop the exit guide. (This relieves tension on the plunger and spring.)

  6. Remove the cover brace [A] ( x2)

  7. Disconnect the solenoid [A] ( x2, x1)

  8. Loosen the plunger screw [A] ( x1).

  9. Remove three screws , , ( x3).

  10. Remove the solenoid unit [A].

  11. Set the bracket on a flat surface.

  12. Turn it over, and remove the solenoid. (x2)