The bottom pawl [B] moves the stapled paper stack up to the proper position to output. Then the stack feed-out pawl [A] that is attached to the stack feed-out belt [C] pushes the paper out. The stack feed-out motor [D] moves the stack feed-out pawl [A] and the bottom pawl [B]. After a stack has been output, both of the pawls [A] [B] return to their HP.
There are two types of stack output.
1. Pawl, exit roller: Small sizes (A4, LT, B4 SEF)
Output is performed by the exit roller as described in the output operation described above.
2. Roller exit: A4, LT, B5 LEF
Only the exit roller is used to perform output without using the mobile fence and output pawls.
Large Sizes (A3, B4, LG, DLT)
1 to 10 documents: Roller output method
More than 11 documents: Pawl, roller output method