1. Remove the following covers. Rear Upper Cover, Rear Lower Cover, Upper Cover
    • Rear Upper Cover
    • Rear Lower Cover
  2. Remove the ground wire [A] in the left lower side of the main unit. ( x 1)
  3. Release the harness from the 4 clamps shown below. ( x 4)
  4. Disconnect the following 7 connectors from the main board. ( x 7)
  5. Open the front door [A] and pull out the booklet stapler unit [B].
  6. Remove the following screws. ( x 6)
  7. Lift up to remove the booklet stapler unit [A]. ( x 2)