1. Remove the rear cover.
  2. Remove the shift tray.
  3. Disconnect the jogger unit cover at the front [A] and rear [B].
  4. Below the front end of the jogger unit cover [A], loosen the screw (do not remove).
  5. Pull the V-notch of the arm [B] out from under the loosened screw.
  6. Remove the jogger unit cover.
  7. Remove rear end cover [A] and front end cover [B].
  8. At the rear, disconnect the jogger unit.
  9. Disconnect the jogger unit at the front and rear.
  10. The jogger unit hangs on two shoulder screws [A] (one at the front and one at the end).
  11. Lift the joggger unit [B] off the shoulder screws and remove it.
  12. Lay the jogger unit on a flat, clean surface.