1. Pull out the stapling unit [A].
  2. Timing gear [A] ( x 1)
  3. Turn the knob [A] clockwise to move the flat fold roller unit [B] in the direction of the arrow.
  4. Move the flat fold roller unit until the edge of the unit [A] is between the guide lines [B] and [C] inscribed on the bracket.
  5. Check that the fold plate [A] has been moved in the direction of the arrow as far as it can go and the bushing [B] on the rear end of the fold plate shaft [C] is aligned with the fold plate positioning cam [D].
  6. Re-attach the timing gear [A] ( x 1)
  7. Reassemble the finisher and connect it to the copier.
  8. Turn on the copier.
  9. After the finisher initialization is complete, check that the flat fold roller unit, fold plate and the cam are positioned as described in steps 4 and 5.