Side Registration Adjustment

Normally the side registration of the image can be adjusted with SP1-002-004 to -006 (Side-to-Side Reg (Shift: Off) : 3-Tray LCT Tray1, 2, 3).

But if the punch hole positions are not aligned from a particular feed tray,  adjust the side registration by changing the tray cover position for the tray, as described below.

After changing the tray cover position, adjust the side registration of the image with the SP1-002-004 to -006.

1. Pull out the tray.

2. Change the screw positions [A] at both the right and left sides as shown.
   

3. After changing the tray cover position, adjust the side registration of the image with the SP1-002-004 to -006.

   

   • Adjustment range: 0 ± 3.0 mm
   • Adjustment step: 0.01 mm/step