• Before doing this procedure, turn off the main machine and disconnect it from its power source.

  1. Open the front door [A].
  2. Pull out the middle tray [B].
  3. Remove the side plate [A] (x 2).
  4. Pull the paper feed unit [A] (x 2).
  5. Slide the sensor bracket [A] to the front (x 1).

    • Note the original position of this bracket. It must be re-installed at its original position.

  6. Remove:
    [A]: Paper feed roller (x 1)
    [B]: Separation roller (x 1)
    [C]: Pickup roller (x 1)