Input Check
| No. | Part Name | SP Name | SP No. | Reading | |
|---|---|---|---|---|---|
| 0 | 1 | ||||
| 1 | Fusing motor | Fusing Motor: Lock | 5-803-041 | Lock | Normal |
| 2 | Paper transport motor | Transport Motor: Lock | 5-803-042 | Lock | Normal |
| 3 | Development motor (CMY) | FC Dev Motor: Lock | 5-803-039 | Lock | Normal |
| 4 | Drum motor (CMY) | FC Drum Motor: Lock | 5-803-040 | Lock | Normal |
| 5 | Drum motor (K) | Bk Drum Motor: Lock | 5-803-038 | Lock | Normal |
Output Check
No. | Part Name | SP Name | SP No. | Remark |
|---|---|---|---|---|
| 1 | Fusing motor | Fusing Motor: Standard Speed 1 | 5-804-029 | Do not use these SPs, but use following SPs instead.
A simple heater control is performed in these SPs, and temperature rises excessively. It can cause the fusing sleeve damaged. |
| Fusing Motor: Low Speed | 5-804-030 | |||
| Fusing Motor: Standard Speed 2 | 5-804-091 | |||
| Fusing Motor: Middle Speed | 5-804-096 | |||
| 2 | Paper transport motor | Transport Motor: Std Speed 1 | 5-804-031 | |
| Transport Motor: Low Speed | 5-804-032 | |||
| Transport Motor: Standard Speed 2 | 5-804-092 | |||
| Transport Motor: Middle Speed | 5-804-097 | |||
| 3 | Development motor (CMY) | FC Dev Motor: Std Speed 1 | 5-804-024 | |
| FC Dev Motor: Low Speed | 5-804-025 | |||
| FC Dev Motor: Middle Speed | 5-804-094 | |||
| 4 | Drum motor (CMY) | FC Drum Motor: Std Speed 1 | 5-804-027 | When you turn ON the motor with these SPs, make sure to separate the color drums and ITB. Before the restoration operation of the machine after abnormal stop, for example JAM, if the drum motor (CMY) is turned ON with these SPs, only the color drums drive. At this time, the ITB has stopped but the ITB is in contact with the color drums. Therefore the color drums and the ITB may be damaged. |
| FC Drum Motor: Low Speed | 5-804-028 | |||
| FC Drum Motor: Middle Speed | 5-804-095 | |||
| 5 | Drum motor (K) | Bk Drum Motor: Std Speed 1 | 5-804-022 | When you turn ON the motor with these SPs, make sure to separate the color drums and ITB. Before the restoration operation of the machine after abnormal stop, for example JAM, if the drum motor (K) is turned ON with these SPs, the K drum and ITB drive. At this time, the color drums have stopped but the color drums are in contact with the ITB. Therefore the color drums and the ITB may be damaged. In addition, if keeps ON for a long time, the cleaning blade can be distorted. When you keeps ON with the ITB unit installed, make sure to do it within 10 seconds. |
| Bk Drum Motor: Low Speed | 5-804-023 | |||
| Bk Drum Motor: Standard Speed 2 | 5-804-090 | |||
| Bk Drum Motor: Middle Speed | 5-804-093 | |||
| 6 | Development Clutch (K) | Development Clutch: Bk | 5-804-026 |