5804

[OUTPUT Check]

5-804-001

Feed Pickup Solenoid 1

ENG

OFF/ON

Moves 1st paper feed tray pick up solenoid.

5-804-002

Feed Pickup Solenoid 2

ENG

OFF/ON

Moves 2nd paper feed tray pick up solenoid.

5-804-003

Bypass Pickup Solenoid

ENG

OFF/ON

Moves bypass pick up solenoid.

5-804-004

Exit Junction Solenoid

ENG

OFF/ON

Moves output paper divide solenoid.

5804

[OUTPUT Check]

Moves paper feed tray rising motor.

* Do not execute SP 5-804-006/008 without removing the paper tray. Otherwise, the tray might be damaged.

5-804-005

Tray 1 Lift Motor:CW

ENG

OFF/ON

5-804-006

Tray 1 Lift Motor:CCW

ENG

5-804-007

Tray 2 Lift Motor:CW

ENG

5-804-008

Tray 2 Lift Motor:CCW

ENG

5804

[OUTPUT Check]

Moves register motor.

5-804-009

Regist Motor:CCW:Standard Speed

ENG

OFF/ON

5-804-010

Regist Motor:CCW:Middle Speed

ENG

5-804-011

Regist Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-015

Regist Motor:Position Hold

ENG

OFF/ON

Holds position of register motor.

5804

[OUTPUT Check]

Moves paper feed motor.

* It is fed if there is paper in the paper tray.

5-804-016

Feed Motor:CW:Standard Speed

ENG

OFF/ON

5-804-017

Feed Motor:CW:Middle Speed

ENG

5-804-018

Feed Motor:CW:Low Speed

ENG

5-804-022

Feed Motor:CCW:Standard Speed

ENG

5-804-023

Feed Motor:CCW:Middle Speed

ENG

5-804-024

Feed Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

Moves vertical carry motor.

5-804-028

Bypass V-Transport Motor:CW:Std Speed

ENG

OFF/ON

5-804-029

Bypass V-Transport Motor:CW:Middle Speed

ENG

5-804-030

Bypass V-Transport Motor:CW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-034

Bypass V-Transport Motor:Position Hold

ENG

OFF/ON

Holds position of vertical carry motor.

5-804-037

Exit Motor: CW: Fusing Pressure Release

ENG

OFF/ON

Moves fusing dis-pressure.

* If driving this motor while attaching the fusing unit, be sure to stop it less than 5 seconds. Otherwise, the unit might be damaged.

5804

[OUTPUT Check]

Moves paper exit motor.

* If driving this motor while attaching the fusing unit, be sure to stop it less than 5 seconds. Otherwise, the unit might be damaged.

5-804-041

Exit Motor:CCW:Standard Speed

ENG

OFF/ON

5-804-042

Exit Motor:CCW:Middle Speed

ENG

5-804-043

Exit Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

Moves reverse motor.

5-804-047

Inverter Motor:CW:Standard Speed

ENG

OFF/ON

5-804-048

Inverter Motor:CW:Middle Speed

ENG

5-804-049

Inverter Motor:CW:Low Speed

ENG

5-804-052

Inverter Mt: CW: Normal Speed: Duplex

ENG

5-804-054

Inverter Mt: CW: Low Speed: Duplex

ENG

5-804-056

Inverter Motor:CCW:Standard Speed

ENG

5-804-057

Inverter Motor:CCW:Middle Speed

ENG

5-804-058

Inverter Motor:CCW:Low Speed

ENG

5-804-061

Inverter Mt: CCW: Normal Speed: Inc Speed

ENG

5804

[OUTPUT Check]

Moves duplex entrance motor.

5-804-065

Duplex Entrance Motor:CW:Standard Speed

ENG

OFF/ON

5-804-066

Duplex Entrance Motor:CW:Middle Speed

ENG

5-804-067

Duplex Entrance Motor:CW:Low Speed

ENG

5-804-068

Duplex Entrance Motor: Normal Speed: Duplex

ENG

5-804-069

Duplex Entrance Motor: Low Speed: Duplex

ENG

5804

[OUTPUT Check]

Moves duplex bypass motor.

5-804-071

Duplex Bypass Motor:CW:Standard Speed

ENG

OFF/ON

5-804-072

Duplex Bypass Motor:CW:Middle Speed

ENG

5-804-073

Duplex Bypass Motor:CW:Low Speed

ENG

5-804-074

Duplex Bypass Motor: CW: Normal Speed: Dup

ENG

5-804-075

Duplex Bypass Motor: CW: Low Speed: Duplex

ENG

5-804-077

Duplex Bypass Motor:CCW:Standard Speed

ENG

5-804-078

Duplex Bypass Motor:CCW:Middle Speed

ENG

5-804-079

Duplex Bypass Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-083

Duplex Bypass Motor:Position Hold

ENG

OFF/ON

Holds position of duplex bypass motor.

5804

[OUTPUT Check]

Moves fusing motor. *See Important below

5-804-092

Fusing Motor:CW:Standard Speed

ENG

OFF/ON

5-804-093

Fusing Motor:CW:Middle Speed

ENG

5-804-094

Fusing Motor:CW:Low Speed

ENG

5-804-098

Fusing Motor:CCW:Low Speed

ENG

Important: Use the procedure below to do the output checks for the fusing exit motor. If you do not follow this procedure, a kink will form in the fusing belt sleeve, and the heating sleeve belt unit will need to be replaced.

1. Do one of the following:

  • Open the right cover of the paper bank
  • Remove one of the toner bottles
  • Pull out the waste toner bottle half-way
  • Remove the fusing unit

2. Enter SP mode.

3. Do the following out output checks:

  • SP5-804-092 (Fusing Motor:CW:Standard Speed)
  • SP5-804-093 (Fusing Motor:CW:Middle Speed)
  • SP5-804-094 (Fusing Motor:CW:Low Speed)
  • SP5-804-098 (Fusing Motor:CCW:Low Speed)

4. Without exiting SP mode, turn the main power switch off and then on again.

Important: If you exit SP mode before you turn the main power switch off, the fusing exit motor will stay off when the machine warms up. Heat will be concentrated in one area of the fusing belt sleeve and cause a kink to form. If this happens, you will need to replace the heating sleeve belt unit.

5. Do the reverse of what you did in step 1 (for example, reattach the fusing unit).

Fusing unit set error is displayed during motor operation. This is because of the specification, and has no problem.

It is recommended to perform a fusing unit operation check with SP1-153-001 (Abnormal Noise Confirmation: Unit: Execute) and 002 (Abnormal Noise Confirmation: Unit: No Unit Execute).

5804

[OUTPUT Check]

5-804-104

Polygon Motor: L

ENG

OFF/ON

Runs motor with 21969 rpm.

5-804-105

Polygon Motor: M

ENG

OFF/ON

Runs motor with 25512 rpm.

5-804-106

Polygon Motor: H

ENG

OFF/ON

Runs motor with 30236 rpm.

5-804-107

Polygon Motor: HH

ENG

OFF/ON

Runs motor with 34488 rpm.

5-804-110

Fusing Fan: Full Speed

ENG

OFF/ON

Moves fusing exhaust heat fan.

5-804-111

Fusing Fan: Half Speed

ENG

OFF/ON

Moves fusing exhaust heat fan.

5-804-113

PSU Cooling Fan

ENG

OFF/ON

Moves PSU cooling fan.

5-804-114

Ozone Fan

ENG

OFF/ON

Moves ozone exhaust heat fan.

5-804-115

PCB Box Cooling Fan/ExhaustCooling Fan

ENG

OFF/ON

Moves electric BOX cooling fan.

5-804-116

PCB Box Cooling Fan: Half Speed

ENG

OFF/ON

Moves electric BOX cooling fan.

5-804-117

DriveCooling/Main/TonerSupplyCoolingFan

ENG

OFF/ON

Moves main unit exhaust heat fan, develop right exhaust air fan, driver cooler.

5-804-118

Development: Right

ENG

OFF/ON

Moves development right fan.

5804

[OUTPUT Check]

Moves develop motor.

5-804-120

Development Motor K: Standard Speed

ENG

OFF/ON

5-804-121

Development Motor K: Middle Speed

ENG

5-804-122

Development Motor K: Low Speed

ENG

5-804-128

Development Motor FC: Standard Speed

ENG

5-804-129

Development Motor FC: Middle Speed

ENG

5-804-130

Development Motor FC: Low Speed

ENG

5804

[OUTPUT Check]

Moves/Stops drum motor FC.

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-132

Drum Motor FC: Standard Speed

ENG

OFF/ON

5-804-133

Drum Motor FC: Middle Speed

ENG

5-804-134

Drum Motor FC: Low Speed

ENG

5804

[OUTPUT Check]

Moves/Stops transfer drum motor K.

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-136

Transfer Drum Motor K: Standard Speed

ENG

OFF/ON

5-804-137

Transfer Drum Motor K: Middle Speed

ENG

5-804-138

Transfer Drum Motor K: Low Speed

ENG

5804

[OUTPUT Check]

Moves paper transfer divide motor.

5-804-140

PTR Contact Motor:CW

ENG

OFF/ON

5-804-141

PTR Contact Motor:CCW

ENG

5804

[OUTPUT Check]

Moves image transfer divide motor (reverse to toner supply motor M).

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-150

Toner Supply Motor M:CW:(ITB Contact)

ENG

OFF/ON

5804

[OUTPUT Check]

Moves relay carry motor (bridge unit).

5-804-163

Bridge Relay/Left Exit Motor: Normal Speed

ENG

OFF/ON

5-804-164

Bridge Relay/Left Exit Motor: Middle Speed

ENG

5-804-165

Bridge Relay/Left Exit Motor: Low Speed

ENG

5-804-166

Bridge Relay/Left Ex Mt: Normal Speed Upper

ENG

5804

[OUTPUT Check]

5-804-169

Bridge Junction/Left Exit Junction Solenoid

ENG

OFF/ON

Moves relay divide solenoid (bridge unit).

5-804-170

Shift Tray Motor:CW

ENG

OFF/ON

Moves shift tray motor.

5-804-171

Shift Tray Motor:CCW

ENG

OFF/ON

Moves shift tray motor.

5-804-172

Toner End Sensor: K Power

ENG

OFF/ON

Supples power to toner end sensor (K).

5-804-173

Toner End Sensor: FC Power

ENG

OFF/ON

Supples power to toner end sensor (FC).

5804

[OUTPUT Check]

Outputs PWM for electrify HVP (DC/AC:Y/M/C/K).

5-804-176

PP: Charge DC: Y

ENG

OFF/ON

5-804-177

PP: Charge DC: M

ENG

5-804-178

PP: Charge DC: C

ENG

5-804-179

PP: Charge DC: K

ENG

5-804-180

PP: Charge AC: Y

ENG

5-804-181

PP: Charge AC: M

ENG

5-804-182

PP: Charge AC: C

ENG

5-804-183

PP: Charge AC: K

ENG

5804

[OUTPUT Check]

Outputs PWM for develop HVP.

5-804-184

PP: Development: Y

ENG

OFF/ON

5-804-185

PP: Development: M

ENG

5-804-186

PP: Development: C

ENG

5-804-187

PP: Development: K

ENG

5804

[OUTPUT Check]

Outputs PWM for transfer HVP (image transfer: Y/M/C/K).

5-804-195

PP: ITB: Y

ENG

OFF/ON

5-804-196

PP: ITB: M

ENG

5-804-197

PP: ITB: C

ENG

5-804-198

PP: ITB: K

ENG

5804

[OUTPUT Check]

Outputs PWM for transfer HVP (paper transfer: +/-).

5-804-199

PP: PTR: +

ENG

OFF/ON

5-804-200

PP: PTR: -

ENG

5804

[OUTPUT Check]

5-804-206

PTR Open/Close LED

ENG

OFF/ON

Lights paper transfer open/close LED.

5-804-208

TM/P Sensor: F

ENG

OFF/ON

Lights TM/P sensor: Front glowing part.

5-804-209

TM/P Sensor: C

 

ENG

OFF/ON

Lights TM/P sensor: Center glowing part.

5-804-210

TM/P Sensor: R

ENG

OFF/ON

Lights TM/P sensor: Rear glowing part.

5-804-211

Toner Sensor Power

ENG

OFF/ON

 

5-804-232

Toner IDTAG Power

ENG

OFF/ON

 

5804

[OUTPUT Check]

5-804-235

Fusing Shading Plate M: CW

ENG

OFF/ON

Moves shade plate of fusing Md to CW direction.

* Execute this SP after removing the fusing unit.

Continuing to turn the fusing shield drive motor while attaching the fusing unit, the units may be damaged.

Procedure:

  1. Remove the fusing unit.
  2. Remove the waste toner bottle.
  3. Execute this SP.

5-804-236

Fusing Shading Plate M: CCW

ENG

OFF/ON

Moves shade plate of fusing Md to CCW direction.

* Execute this SP after removing the fusing unit.

Continuing to turn the fusing shield drive motor while attaching the fusing unit, the units may be damaged.

Procedure:

  1. Remove the fusing unit.
  2. Remove the waste toner bottle.
  3. Execute this SP.

5-804-239

Fusing Exit Drive Solenoid

ENG

OFF/ON

 

5804

[OUTPUT Check]

Continuously drives specified motor for operation test.

5-804-241

Bank: Tray3: Feed Mt: Standard Speed

ENG

OFF/ON

5-804-242

Bank: Tray4: Feed Mt: Standard Speed

ENG

5-804-243

Bank: Tray5: Feed Mt: Standard Speed

ENG

5-804-244

Bank: Tray3: Transport Mt: Standard Speed

ENG

5-804-245

Bank: Tray4: Transport Mt: Standard Speed

ENG

5-804-246

Bank: Tray5: Transport Mt: Standard Speed

ENG

5804

[OUTPUT Check]

Drives specified motor for a certain period of time to test operation.

5-804-247

Bank: Tray3: PU Solenoid

ENG

OFF/ON

5-804-248

Bank: Tray4: PU Solenoid

ENG

5-804-249

Bank: Tray5: PU Solenoid

ENG