1. Remove all the covers. (Right Front Cover, Left Front Cover, Rear Cover, Top Cover)
  2. Disconnect the solenoid [1] (x1).
  3. Unfasten the solenoid [2] (x1).
  4. Remove the solenoid.

Re-installation

  • When re-installing the solenoid, make sure that the arm of the solenoid is positioned above and in contact with the plate of the pick-up roller shaft below.
  • To confirm correct installation, manually move the solenoid plunger to the left and right. When the solenoid plunger is moved, the pick-up roller should move up and down smoothly.