Target Part/SP No.: Paper End Sensor (1st Feed Tray) / SP5-803-015 (Tray 1: Paper End Detection)

Cause verification

Problem Judgement

Execute an INPUT check when there is no paper at the position of the referenced sensor.

1: Paper detected

Execute an INPUT check when there is paper at the position of the referenced sensor.

0: Paper not detected

Solution:

  • Reconnect the connector.
  • Replace the sensor.
  • Replace the Paper Transport IOB.
  • Replace the harness.
Feeler for 1st paper end sensor

Cause verification

Problem Judgement

Check if the feeler for 1st paper end sensor is unfastened.

Feeler is unfastened.

Solution:

  • Reinstall the feeler.
  • Check if there are any defects in the 1st paper feed unit.