• When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.

  • LCIT RT3030 [A] can be connected to Paper Feed Unit PB3240 [2] or LCIT PB3260 [3] only in one of the following two combinations.

 

  1. Remove the orange tape and retainers.

  2. Remove the accessories (stud screws, etc.) from the package.

  3. Remove the eight covers on the right of the paper feed table of the machine.

    Insert the flat-headed screwdriver into the  cover and push and turn the driver counterclockwise to remove the it.

  4. Attach the joint pins [A] to the front and rear on the right of the paper feed table.
  5. Attach the front bracket [A] and rear bracket [B] at the positions of the joint pins (×4).
  6. Remove the paper feed table rear cover [A] (×2).
  7. Remove the connection cover, and connect the harness [B].
    For a machine with LCIT PB3260

    For a machine with Paper Feed Unit PB3240
  8. Clamp the harness.
    For a machine with LCIT PB3260

    For a machine with Paper Feed Unit PB3240
  9. Attach the paper feed table rear cover.
  10. Attach the hooks of the side LCIT to the brackets.
  11. Connect the cable [A] of the side LCIT to the machine (×1).
  12. Attach the connector cover [A] (×1).
  13. Push the side LCIT towards the machine.
  14. Turn on the main power.
  15. Set the paper, and check that the paper size set in the paper feed tray is displayed on the control unit.
  16. Do the registration adjustment for the large capacity tray.
    SP1-002-007 (Side-to-Side Registration Large Capacity Tray)
SP descriptions
  • SP1-002 (Side-to-Side Registration)

Adjusts the side-to-side registration by changing the laser main scan start position for each mode and tray.

Increasing a value: The image is moved towards the rear edge of the paper.

Decreasing a value: The image is moved towards the front edge of the paper.