• After adjusting the Leading Edge Registration and Side Registration settings (see the previous section), do the Erase Margin Adjustment. To do this, check the values of Margins C and D.
  • If they are not within the specifications (see below), then adjust C and D with SP2-103-001 to -020 as explained below. Then check Margins A and B again.

  1. In SP2-109-003 (Test Pattern: Pattern Selection), select "07:Grid Pattern Small", and print the test pattern. (Test Pattern Printing)
  2. Check the erase margins C and D. Adjust them with SP2-103-001 to -020 if necessary.
    • Leading edge [A]: 0.0 to 9.0 mm (default: 4.2 mm)
    • Side-to-side [B] and [D]: 0.0 to 9.0 mm (default: 2.0 mm)
    • Trailing edge [C]: 0.0 to 9.0 mm (default: 4.2 mm)