| Item | Spec. |
|---|
| Configuration | Console type ink jet printer |
| CPU | Marvell ® 88PA6270 Rev.C1 1.2GHz |
| Memory | |
| Number of print heads | 3 heads |
| Media vacuuming | Vacuuming is performed by a fan. (Divided into 9 levels.) |
| Media feed method | One media input location, paper bypass location |
| Warm-up time (25°C (77°F)) | Time required for the heater to reach the set temperature after power is turned on (Heater settings: pre-heater 60 °C (140°F), print heater 55 °C (131°F), post-heater 70 °C (158°F)) |
| Print mode | 6 Pass, 8 Pass, 12 Pass, 16 Pass, 32 Pass, 12 Pass (White) |
| Print speed | For 12 Pass mode (600 × 900 dpi), color single layer print- RICOH Pro L5130
- 4C: 22.3 m2/h
- 4C+W: 11.6 m2/h
- RICOH Pro L5160
- 4C: 25.0 m2/h
- 4C+W: 12.9 m2/h
Print speed may vary depending on environment, job type, and application settings. |
| Maximum resolution | 1,200×1,200dpi |
| Supported media | - Types of recommended media:
PVC/Tarpaulin/PET/PP/Coated Paper/Plain Paper/Soft Signage (Fabric)/Wallpaper/Canvas
- Media width
- RICOH Pro L5130:297 – 1,371 mm (approx. 11.69 – 53.98 inches)
- RICOH Pro L5160:297 – 1,625 mm (approx. 11.69 – 63.98 inches)
- Media thickness
115 – 432 um - Roll media
- Outside diameter:A diameter of 250 mm (9.84 inches) or less
- Core size (bore):2 or 3 inches
- Weight:55 kg (121.25 lb.) or less
|
| Maximum print area | - RICOH Pro L5130
Width: 1,361 mm (approx. 53.58 inches)
Length: 300,000 mm (approx. 11,811.02 inches)
- RICOH Pro L5160
Width: 1,615 mm (approx. 63.58 inches)
Length: 300,000 mm (approx. 11,811.02 inches)
|
| Distance accuracy | - Absolute accuracy
±0.3 mm or ±0.3% of the specified distance, whichever is larger. - Reproducibility
±0.2 mm or ±0.1% of the specified distance, whichever is larger.
|
| Perpendicularity | ±0.5 mm/500 mm |
| Media skew | - Roll media
5 mm or less/10 m
|
| Print head height adjustment | Default/+1/+2/+3- Head rising amount
- Default (The distance between a print head and the platen:1.8 mm (approx. 0.07 inches))
- +1(+0.5 mm (approx. +0.02 inches))
- +2(+1 mm (approx. +0.04 inches))
- +3(+2 mm (approx. +0.08 inches))
|
| Media cut | Auto/manual (only for the horizontal direction) |
| Media output method | Automatically rolling up media with the roll-up unit (the rolling up face can be switched to either inner winding of the print side or outer winding of the print side.) |
| Waste ink bottle | 1,600 cc |
| Supported interface | Ethernet (1000BASE-T, 100BASE-TX) × 1 |
| Network protocol | TCP/IP (IPv4, IPv6), DNS, HTTP, Bonjour |
| Supported operating system | According to ONYX specifications
(If you use a supported RIP software other than ONYX, check the specifications of each piece of RIP software.) |
| Printer command | RPCS raster |
| Noise emission | - Standby
71 dB (A) or lower - Printing
78 dB (A) or lower
|
| Power | - mainly Europe and Asia
AC220–240 V, 16 A, 50/60 Hz (These values are for one power cord only.) - mainly North America
AC208–240 V, 16 A, 50/60 Hz (These values are for one power cord only.)
|
| Maximum power consumption (main unit only) | 6,000 W or less |
| Operating environment | - Temperature:
15–30°C (59–86°F) (Recommended range: 20–25°C (68–77°F)) - Humidity:
35–80% (Recommended range: 40–60%)
Printing may stop to protect the machine for conditions outside those described above. |
| Weight | - RICOH Pro L5130
360 kg (793.7 lb.) - RICOH Pro L5160
380 kg (837.8 lb.)
|
| Dimensions (W × D × H) | - RICOH Pro L5130
W × D × H: 3,050 × 1,000 × 1,500 mm (approx. 120.08 × 39.37 × 59.06 inches) - RICOH Pro L5160
W × D × H: 3,300 × 1,000 × 1,500 mm (approx. 129.92 × 39.37 × 59.06 inches)
|
| Machine occupation dimensions (W × D) | - RICOH Pro L5130
4,050 × 3,000 mm or more (approx. 159.45 ×118.11 inches) - RICOH Pro L5160
4,300 × 3,000 mm or more (approx. 169.29 ×118.11 inches)
|