Printer Switches

Printer Switch 00 (SP No. 1-103-001)

No

Function

Comments

0

Select page separation marks

0: Off

1: On

0: If a 2 page RX transmission is split, [*] is printed in the bottom right corner of the 1st page and only a [2] is printed in the upper right corner of the 2nd page.

1: If a 2 page RX transmission is split into two pages, for example, [*] [2] is printed in the bottom right corner of the 1st page and only a [2] is printed in the upper right corner of the 2nd page.

1

Repetition of data when the received page is longer than the printer paper

0: Off

1: On

1: Default. 10 mm of the trailing edge of the previous page are repeated at the top of the next page.

0: The next page continues from where the previous page stopped without any repeated text.

2-7

Not used

Do not change the settings.

Printer Switch 03 (SP No. 1-103-004)

No

Function

Comments

0*

Length reduction of received data

0: Disabled

1: Enabled

0: Incoming pages are printed without length reduction.

(Page separation threshold: Printer Switch 03, bits 4 to 7)

1: Incoming page length is reduced when printing.

(Maximum reducible length: Printer Switches 04, bits 0 to 4)

1-3

Not used

Do not change the settings

4

to

7

Page separation setting when sub scan compression is forbidden

00-0F (0-15 mm: Hex)

Default: 6 mm

Page separation threshold (with reduction disabled with switch 03-0 above).

For example, if this setting is set to "10", and A4 is the selected paper size:

If the received document is 10 mm or less longer than A4, then the 10 mm are cut and only 1 page prints.

If the received document is 10 mm longer than A4, then the document is split into 2 pages.

Printer Switch 04 (SP No. 1-103-005)

No

Function

Comments

0

to

4

Maximum reducible length when length reduction is enabled with switch 03-0 above.

[Maximum reducible length] = [Paper length] + (N x 5mm)

"N" is the decimal value of the binary setting of bits 0 to 4.

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

Setting

0

0

0

0

0

0 mm

0

0

0

0

1

5 mm

0

0

1

0

0

20 mm

1

1

1

1

1

155 mm

For A5 sideways and B5 sideways paper

[Maximum reducible length] = [Paper length] + 0.75 x (N x 5mm)

5

6

Length of the duplicated image on the next page, when page separation has taken place.

Bit 6

Bit 5

Setting

0

0

4 mm

0

1

10 mm

1

0

15 mm

1

1

Not used

7

Not used.

Do not change the setting.

Printer Switch 05 - Not used (do not change the settings)

Printer Switch 06 (SP No. 1-103-007)

No

Function

Comments

0*

Printing while a paper cassette is pulled out, when the Just Size Printing feature is enabled.

0: Printing will not start

1: Printing will start if another cassette has a suitable size of paper, based on the paper size selection priority tables.

Reference:

Just size printing on/off – User switch 05, bit 5

1-7

Not used.

Do not change the settings.

Printer Switch 07 (SP No. 1-103-008)

No

Function

Comments

0

Not used.

Do not change the settings.

Selects whether or not to print at a reduced size (95%) when printing on sheets with the width of letter-size paper.

0:OFF

1:ON

4

Receiver name printed on the transmission result report

Selects the printing target on the transmission result report.

0: All receivers

1: Printing only receivers which have received fax transmission.

5-7

Not used.

Do not change the settings.

Printer Switch 08 - Not used (do not change the settings)

Printer Switch 09 - Not used (do not change the settings)

Printer Switch 0A - Not used (do not change the settings)

Printer Switch 0B - Not used (do not change the settings)

Printer Switch 0C - Not used (do not change the settings)

Printer Switch 0E (SP No. 1-103-015)

No

Function

Comments

0*

Paper size selection priority

0: Width

1: Length

0: A paper size that has the same width as the received data is selected first.

1: A paper size which has enough length to print all the received lines without reduction is selected first.

1*

Paper size selected for printing A4 width fax data

0: 8.5" x 11" size

1: A4 size

This switch determines which paper size is selected for printing A4 width fax data, when the machine has both A4 and 8.5" x 11" size paper.

2

Page separation

0: Enabled

1: Disabled

1: If all paper sizes in the machine require page separation to print a received fax message, the machine does not print the message (Substitute Reception is used).

After a larger size of paper is set in a cassette, the machine automatically prints the fax message.

3-4

Printing the sample image on reports

"Same size" means the sample image is printed at 100%, even if page separation occurs.

User Parameter Switch 19 (13H) bit 4 must be set to "0" to enable this switch.

Refer to “Detailed Descriptions” for more details.

Bit 4

Bit 3

Setting

0

0

The upper half only

0

1

50% reduction (sub-scan only)

1

0

Same size

1

1

Not used

5-6

Not used

Do not change the settings.

7

Equalizing the reduction ratio among separated pages

(Page Separation)

0: Enabled

1: Disabled

0: When page separation has taken place, all the pages are reduced with the same reduction ratio.

1: Only the last page is reduced to fit the selected paper size when page separation has taken place. Other pages are printed without reduction.

Printer Switch 0F - Not used (do not change the settings)