I-Fax Switches

I-fax Switch 00 Not used (do not change the settings)

I-fax Switch 01 (SP No. 1-102-002)

No

Function

Comments

Do not change these settings.

This setting selects mm/inch conversion for mail transmission.

0: Off (No conversion), 1: On (Conversion)

When on (set to "1"), the machine converts millimeters to inches for sending mail. There is no switch for converting inches to millimeters.

Unlike G3 fax transmissions which can negotiate between sender and receiver to determine the setting, mail cannot negotiate between terminals; the mm/inch selection is determined by the sender fax.

When this switch is Off (0):

• Images scanned in inches are sent in inches.
• Images scanned in mm are sent in mm.
• Images received in inches are transmitted in inches.
• Images received in mm are transmitted in mm.

When this switch is On (1):

• Images scanned in inches are sent in inches.
• Images scanned in mm are converted to inches.
• Images received in inches are transmitted in inches.
• Images received in mm are converted to inches.

I-fax Switch 03 - Not used (do not change these settings)

I-fax Switch 04 (SP No. 1-102-005)

No

Function

Comments

0

Subject for Delivery TX/Memory Transfer

This setting determines whether the CSI registered on this machine or the CSI of the originator is used in the subject lines of transferred documents.

0: Puts the CSI of the originator in the Subject line. Only CSI can be received for use in the subject line.

1: Puts the CSI registered on this machine in the Subject line.

When this switch is used to transfer and deliver mail to a PC, the information in the Subject line that indicates where the transmission originated can be used to determine automatically the destination folder for each e-mail.

1-7

Not Used

I-fax Switch 05 (SP No. 1-102-006)

No

Function

Comments

0

Mail Addresses of SMTP Broadcast Recipients

Determines whether the e-mail addresses of the destinations that receive transmissions broadcasted using SMTP protocol are recorded in the Journal.

For example:

"1st destination + Total number of destinations: 9" in the Journal indicates a broadcast to 9 destinations.

0: Not recorded

1: Recorded

1

IFAXTX Retries

Determines whether the machine retries sending IFAX when connection and transmission fails due to errors.

0: Disabled

1: Enabled

2

Selects whether to enable or disable the size adjustment function in the main scanning direction when sending TIFF files to e-mail or folder destinations.

0: OFF (Disabled) Size adjustment is not performed. (Normal operation)

1: ON (Enabled) Size adjustment is performed.

I-fax Switch 06 - Not used (do not change the settings)

I-fax Switch 07 - Not used (do not change the settings)

I-fax Switch 08 - Not used (do not change the settings)

I-fax Switch 09 (SP No. 1-102-010)

No

Function

Comments

0-3

Not used

Do not change the settings

4-7

Restrict TX Retries

This setting determines the number of retries when connection and transmission fails due to errors.

01-F (1-15 Hex)

I-fax Switch 0A - Not used (do not change the settings)

I-fax Switch 0B - Not used (do not change the settings)

I-fax Switch 0C - Not used (do not change the settings)