1. Open the front door [A], and then pull out the paper tray [B].

  2. Pull out the paper feed unit [A]

  1. Left rear cover (External Covers)

  2. Put a hand to the rear side of the bracket [A] for feed motor and transport motor , then push the pin [B] towards the front side.

  3. Remove the bracket [A] for feed motor and transport motor.

      • When pushing the pin towards the front side, turn the shaft [A] so the pin can slip out from the keyhole [B].

  4. Feed/transport motor bracket [A] (x4, x2, x2)

  5. Remove the spring [A], and then loosen screw [B].

  6. Remove the spring [C], and then loosen screw [D].

  7. Paper feed motor [E] (x2, Timing belt x1)

  8. Transport motor [F] (x2, Timing belt x1)

  • When you reinstall the motors, attach the tension springs, and then tighten the screws to tighten the belts.