Side Registration Adjustment

The side-to-side registration for this LCT can be adjusted with SP1-003-800 (Side-to-Side Reg: LCT).

However, if punched hole positions are not aligned on paper fed from this LCT, you can first adjust the side registration by changing the tray cover position as described below, and then adjust the side registration of the image with SP1-003-800.

1. Pull out the tray [A].

2. Change the screw positions at both the right and left sides as shown.

   • Adjustment range: 0±3.0 mm

   • Step: 0.1 mm