1. Set the bit 0 of System Bit Switch 00 to 1.
  2. Enter Address Book Management mode ([User Tools] > [Machine Features] > [System Settings] > [Key Operator] > [Address Book Management]).
  3. Select the address book that you want to program.
  4. For the fax parameter, select "Fax Dest.", for the E-mail parameter, select "E-mail", then press "Start". Make sure that the LED of the Start button lights green.
  5. The settings for the switch 00 are now displayed. Press the bit number that you wish to change.
  6. To scroll through the parameter switches, either:
  7. Select the next switch: press "Next" or Select the previous switch: "Prev." until the correct switch is displayed. Then go back to step 6.
  8. After the setting is changed, press "OK".
  9. After finishing, reset bit 0 of System Bit Switch 00 to 0.