Do the following procedure to enable the Client-side Machine(s) to receive faxes via the Remote Machine. You can forward or route received documents per line or special sender.

  • By performing procedures described above (Installing the application in the Remote Machine and Client-side Machine, Registering the Client-side Machine(s), Registering the Remote Machine), the Client-side Machines can send faxes via the Remote Machine. The procedures shown below are necessary to enable the Client-side Machines to receive faxes.

On the Remote Machine:

1) If you use "Remote Reception Setting per Line"

  1. Press [Facsimile Features].
  2. Press [Remote Reception Setting per Line] in [Reception Settings].
  3. Enter an IP address or a host name of the client-side machine to connect.
  4. Press [Set], and [Exit] to exit from the setting.

2) If you use "Remote Reception per Sender"

  1. Press [Facsimile Features].
  2. Press [Program Special Sender] in [Reception Settings].
  3. Select the Special Sender.
  4. Press [Remote Reception Setting per Sender].
  5. Press [On] and [Remote Machine].
  6. Enter an IP address or a host name of the client-side machine to connect.
  7. Press [OK] to exit from the setting.