Attaching the Tab Sheet Holder (Vacuum Feed A3 LCIT)

By attaching the tab sheet holder, you can prevent air from escaping at the trailing edge of the paper and so improve separation.

1. Check that paper in the paper tray is not being used, and then pull the tray carefully out until it stops.

   

2. Take out the tab fence from the pocket on the right-hand side of the paper tray.

   

3. Set the side fences to the size of the tab stock to be loaded, and then load it.

4. Attach the tab fence, and then align the end fence gently against the paper you loaded while pressing the release button of the end fence.

   

5. Carefully slide the paper tray fully in.