Menu level

Description

1st level

2nd level

3rd level

Screen Device Settings Information

Status

 

Displays the following:

  • Wi-Fi MAC address
  • Bluetooth address
  • Interface Settings
  • Wi-Fi settings (ON/OFF)
  • IP Address (displayed when "Wi-Fi settings" is set to ON.)
 

Legal information

Open source licenses

Displays the open source license information.

 

Software Version List

 

Displays the versions of operation panel firmware and installed applications.

When saving the software version list on an SD card, insert an SD card into the SD card slot of the operation panel, and then press [Save to SD Card].

 Hardware Version 

Displays the hardware information of the operation panel with a 4-digit code.

   

1st digit: LCD size

  • 1:  10.1"
  • 2:  7"
  • 3:  17"
   

2nd digit: LCD vendor

  • 0:  AUO
  • 1:  INNOLUX
  • 2:  Dongbond
  • 5:  AUO
  • 6:  Giantplus
    3rd digit: eMMC version
  • 5:  Version 4.41
  • 7:  Version 5.00
  • 8:  Version 5.10
   4th digit: PCB vendor
  • N:  NEC
  • R:  RICOH

Screen Device Settings

Server Settings

Port number

Input a port number for communication with the import/export and RFU server. The input number is used for both HTTP and HTTPS connections.

(Normally, input a number within 55101-55111.)

 

Application Settings

 

Displays a list of installed applications.

If you press [Settings] for an application, the setting screen for the CE is displayed. The screen does not change if the application has no setting items.

 

Authentication priority mode

Authentication priority mode

This setting gives priority to the recovery time from energy saving modes when an IC card authentication device is connected.

When this setting is selected, the MFP does not enter Engine OFF mode, and always recovers from Silent mode.

  

Start time(hhmm)

You can specify the start time of Authentication priority mode.

Note: This can be changed only when [Authentication priority mode] is deselected.

  

Expiration time(hours)

You can specify the period of validity of Authentication priority mode.

Note: This can be changed only when [Authentication priority mode] is deselected.

 Home key settingsHome key settingsYou can change the transition destination except for the Home screen when pushing the [Home] icon.
  Home Key Assignment Mode

Normal mode:
In addition to pressing the [Home] icon, in all statuses such as logout and restoring from lower power display mode, the screen transitions to the destination which the user set with [Home Key Application].

UI change mode:
The screen transitions to the destination which the user set with [Home Key Application] only when you press the [Home] icon.

  Home Key ApplicationYou can set the application of the transition destination when pressing the [Home] icon.
  Show default Home for unauthenticated userYou can specify whether the guest user can access the application selected in [Home Key Application] when user authentication is set to ON.
  System Home Key Icon Settings

You can use this setting only when [Home Key Assignment Mode] is [ON] and [UI Change Mode] is selected in [Home Key Assignment Mode].

You cannot set other than the above because of high brightness.

 

Screen device always-connection Setting

 

This setting prevents the operation panel from entering Sleep mode, so that Bluetooth and other communication devices remain connected.

When this setting is selected, the operation panel does not enter Sleep mode. Only the LCD (display panel) turns OFF.

 

Panel Self Check

 

Starts self-diagnosis of the operation panel.

(Panel Self Check)