Remove the scanner unit. (Scanner Unit
)
Remove the controller box. (Controller Box (MP 501/601)
)
Remove the following covers.
Left lower cover (Left Lower Cover
)Paper exit cover (Paper Exit Cover
)
Release the lock lever [A] by rotating it towards you, and then remove the toner cartridge [B].
Release the two hooks from the operation panel arm upper cover [A].
Insert a flathead screwdriver into [A] to release the hook, and then remove the operation panel arm upper cover [B].
Be careful not to damage the hooks on the inside of the operation panel arm upper cover when you remove or install the operation panel arm upper cover.
Release the USB cable [A] and harness [B] of the operation panel from the harness guides.
Remove the operation panel unit with bracket [A].
Remove the bracket [A].
The screw [B] is a sems screw. Be careful not to use the wrong screw when installing the paper exit tray.
Remove the two screws from the left side cover [A].
Remove the left side cover [A].
These two screws are tapping screws. Be careful not to use the wrong screws when installing the paper exit tray.
Remove the front right cover [A].
Remove the two screws from the right side cover [A].
Remove the right side cover [A].
These two screws are tapping screws. Be careful not to use the wrong screws when installing the paper exit tray.
Remove the paper exit tray [A].
The screw [B] is a sems screw. Be careful not to use the wrong screw when installing the paper exit tray.
Be careful not to damage the hooks on the inside of the paper exit tray when you remove or install the paper exit tray.
