1. Remove the enhanced security HDD from its protective pack.
  2. Connect the power source cable [A] and data cable [B] to the enhanced security HDD [C].
  3. Install the enhanced security HDD [A] on the HDD bracket [B] with the stepped screws.
  4. Remove the HDD cover.
  5. Pull up the shield lid [A] and pull it toward you to remove it.

  6. Install the HDD with the bracket [A].

    • Connect the connectors as follows.

  7. Attach the shield lid [A].
  8. Attach the HDD cover.

  • Connect the connectors as follows.