Input Check
| No. | Part Name | SP Name | SP No. | Reading | |
|---|---|---|---|---|---|
| 0 | 1 | ||||
| 2 | Toner end sensor (C) | Toner End Sensor: C | 5-803-024 | Not end | End |
| 4 | Toner end sensor (M) | Toner End Sensor: M | 5-803-023 | Not end | End |
| 6 | Toner end sensor (Y) | Toner End Sensor: Y | 5-803-022 | Not end | End |
| 8 | ITB contact HP sensor | Image Transfer Contact HP Sensor | 5-803-016 | Contact | Not contact |
Output Check
No. | Part Name | SP Name | SP No. | Remark |
|---|---|---|---|---|
| 1 | Toner supply motor (K) | Toner Supply Motor: Bk | 5-804-038 | Operation : Run the toner supply motor for 1.5 sec.. Notes :
|
| 3 | Toner supply motor (C) | Toner Supply Motor: C | 5-804-037 | |
| 5 | Toner supply motor (M) | Toner Supply Motor: M | 5-804-036 | |
| 7 | Toner supply motor (Y) | Toner Supply Motor: Y | 5-804-035 | |
| 9 | ITB Contact Motor | Image Transfer Contact Motor | 5-804-033 | If you execute this SP, the ITB roller halts at a position which is not at the home position (separated from the ITB). If you remove or install the PCDU or the ITB unit immediately after the motor is switched ON/OFF with this SP, the drums and ITB may be damaged. Before you remove/install the PCDU or the ITB unit, initialize the machine with turning the main power OFF/ON or opening/closing the front door. |
| 10 | ID sensor | TM/ID Sensor: Front | 5-804-071 | |
| TM/ID Sensor: Center | 5-804-072 | |||
| TM/ID Sensor: Rear | 5-804-073 | |||
| 11 | ID Sensor Shutter Solenoid | TM Sensor Shutter Solenoid | 5-804-021 | After the motor is turned ON with this SP, it is turned OFF automatically in about 30 seconds. If you repeat turning OFF and ON continuously, the temperature of the solenoid rises. It can wrinkle the ITB near the solenoid. |
| - | - | Toner End Sensor Power | 5-804-039 | |
| - | - | ID Tag: Power Supply Control | 5-804-042 | |
| - | - | Toner Sensor Power | 5-804-043 |