Cleaning the Paper Feed Path in the Multi Bypass Tray (Tray 6)

Clean the guide board and paper feed rollers in the multi bypass tray (Tray 6).

Wipe the guide board with a well-wrung-out damp cloth. To reach the inmost recesses, the cloth should be the size of your palm.

1. Remove the loaded paper.

2. Clean the side fences and front guide.

   

3. Pull off the snap-off cover.

   

4. Remove black screw.

   

5. Remove the plate.

   

6. Remove the black screw on the sensor positioning plate [A].

7. Push the sensor positioning plate [A] to the left.

   If this plate is not pushed to the left, you will not be able to remove the feed roller.

   

8. Clean the paper feed rollers.

   

9. Slide the paper tray [B] to the right.

   

10. Clean the guide board [C].

    

11. After cleaning, restore the machine to its operational state.