Cleaning the Paper Feed Path in the A3 LCIT (Trays 3-5)

Clean the guide board and paper feed rollers in the A3 LCIT.

The procedure is explained using Tray 3 as an example.

The procedure is the same for Trays 4 and 5.

1. Open the A3 LCIT front cover.

2. Pull open the top tray (Tray 3) until it stops. If there is any paper in the tray, remove it.

3. Clean the side fences and front guide.

   

4. Remove the two black screws on the side plate, and then remove the plate.

   

5. Remove the two black screws on the paper feed unit U2, and then pull out the paper feed unit U2 until it stops.

6. Clean the paper feed rollers.

   

7. Clean the guide board [A] of the paper feed unit.

   

8. Open the guide board (U1), (U3), and (U5), and then clean the guide board interior [B].

   

9. After cleaning, restore the machine to its operational state.