Solution
If the mask width of paper leading edge can be widened, or the erase margin of trailing edge can be widened;
Set 0106 [Adjust Erase Margin WithFeed Direction] in Adjustment Settings for Skilled Operator to +0.5 mm against the current value. In Custom Paper Settings, set 011 [Adj. Erase Margin of Trailg. Edge: Prod.], and 012: [Adj. Erase Marg. of Trailg. Edge: Qual.] to +0.5 mm against the current value.
Print the target image.
Is the problem solved?
Yes: Finished.
No: Repeat the step 1 through 3. If the problem is not solved by the maximum value, no further improvement can be expected in the field. Ask customer for using other paper.
The applicable numbers for the items in the “Custom Paper Settings” vary depending on the printing mode of the machine. Refer to Applied Setting Items for Custom Paper Setting
about which number you need to adjust.
Print Mode |
Items Applied |
|---|---|
B/W, FC, FCS, S only |
011: [Adj. Erase Margin of Trailg. Edge: Prod.] |
FCS Quality |
012: [Adj. Erase Marg. of Trailg. Edge: Qual.] |
If the mask width of paper leading edge cannot be widened, or the erase margin of trailing edge cannot be widened;
Is it possible to change the image position?
Yes: Go to step 2
No: No further improvement can be expected. Ask customer for using other paper.
Set 0102 [Adjust Image Position WithFeed Direction] in Adjustment Settings for Skilled Operator to +0.5 mm against the current value.
In Custom Paper Settings, set 033 [Paper Transfer Current;Trail Edge: B&W] to +0.5 mm against the current value.
Adjust the image position of Side 2 along with Side 1. In Custom Paper Settings, adjust it with 004 [Adj Image Position of Side2 With Feed].
Print the target image.
Is the problem solved?
Yes: Finished.
No: Repeat step 2 through 5. If the problem is not solved by the maximum value, no further improvement can be expected in the field. Ask customer for using other paper.
