1. Remove the jogger unit. Jogger Unit Removal
  2. The fence lift motor is on the rear end of the unit.
  3. Remove the top cover.
  4. Disconnect the harness clamp from the plate.
  5. Disconnect the lift motor and free the harnesses.
  6. Disconnect the lift sensors.
  7. Pull the freed harnesses away from the rear end of the unit.
  8. Remove the rear end plate.
  9. Set the plate aside with the actuator of the down sensor [1] and up sensor [2].
  10. Remove bushing [3] so that it does not fall out and get lost accidentally.
  11. Disconnect the lift motor.
  12. Remove the motor.