The shutdown functions and their uses are as follows.

Shutdown mode

Use

Operation

Normal Shutdown

Same as shutdown by users.

Turn the main power switch off.

Forced shutdown

When normal shutdown does not complete even though you waited a long time.

Hold the main power switch 6 seconds or longer.

Shutdown for parts replacement

  • When you have to disconnect the power cord from the power outlet, such as when replacing parts.
  • When you want to start the machine normally and then enter recovery mode, without changing the Startup mode in Screen Features. (For updating control panel firmware)

Turn the main power switch off while holding down [Stop].

Shutdown for software update

When you are going to turn on the MFP within 5 minutes for updating the MFP firmware or package.

(Use shutdown for parts replacement if you are updating the control panel firmware.)

Turn the main power switch off while holding down the [EX1] key.