Adjust the blank margin width only if it cannot be adjusted by registration (leading edge/side-to-side). First adjust C and D; then A and B.
[1]: Print area
[2]: Paper feed direction
Enter the SP mode, and then print the test pattern (17: Trimming Area) with SP2-109-001.
Adjust the blank margin width of the image with SP2-103-(001-004).
Leading edge: 2.7 to 9.9 mm (Default: 3.0 mm)
Trailing edge: 0.0 to 9.9 mm (Default: 2.0 mm)
Left: 0.0 to 9.9 mm (Default: 2.0 mm)
Right: 0.0 to 9.9 mm (Default: 2.0 mm)