Follow the test pattern print procedure below to print a test pattern.
Do not operate the machine until the test pattern has been printed. Otherwise, an SC occurs.
Enter the SP mode, and then select SP2-109-001.
Select the pattern number, and then press [OK].
Do the following SP to print the test pattern.
SP |
|
|---|---|
SP2-109-002 |
Test Printing 1 Sheet |
SP2-109-003 |
Test Printing Cont. Printing (On: Continue /Off: Stop) |
SP2-109-004 |
Test Printing Print Side Select |
Check the test pattern.
No. |
Pattern |
No. |
Pattern |
|---|---|---|---|
0 |
None |
9 |
Slanting Grid 20mm Pitch |
1 |
Vertical Line (1 dot) |
10 |
Independent Pattern (1 dot) |
2 |
Horizontal Line (1 dot) |
11 |
Independent Pattern (2 dot) |
3 |
Vertical Line (2 dot) |
12 |
Independent Pattern (4 dot) |
4 |
Horizontal Line (2 dot) |
13 |
Full Dot Pattern |
5 |
Grid Vertical Line |
14 |
Band |
6 |
Grid Horizontal Line |
15 |
Gray 10mm Pitch |
7 |
Grid 20mm Pitch |
16 |
Gray 20mm Pitch |
8 |
Slanting Grid |
17 |
Trimming Area |