Remove the right cover. (Right Cover
)
Disconnect the flat cable and two connectors.
Make sure to open the flap before disconnecting the flat cable [A], as shown in the following pictures. Otherwise, the connector may be damaged.
Release the flat cable and harness from the harness guides.
Remove the seven screws from the controller box [A].
The screw [B] is a tapping screw. Be careful not to use the wrong screws when installing the controller box.
Release the hook [A], and then remove the controller box [B].
When installing the controller box [A], make sure to secure the harness and flat cable to the harness guides, as shown below.
When installing the bracket [A] of the controller box [B], do not interpose the harness and the flat cable between the bracket and the controller box.
