Skip header
 

Top Page > Advanced Instructions > Capturing the Engine Debug Log > Procedures for Capturing the Engine Debug Log via the Service Slot Board

Procedures for Capturing the Engine Debug Log via the Service Slot Board

  1. Turn the main power switch [A] OFF.

    d194z0215.jpg

  2. Insert the SD card into the Service Slot Board.

  3. Turn the main power switch ON.

  4. Log capture starts automatically.

  5. Execute the job or operation for which the error occurred.

  6. Turn the main power switch OFF.

  7. Remove the SD card.

  8. Send all files saved to the SD card to your supervisor.

Note

  • Information equivalent to when entering the “log” command to capture the engine log via the Debug Cable (described below) is automatically saved to the SD card.

  • For the Service Slot Board installation method, refer to “(Service Option)” in Chapter 2 of Field Service Manual.